LG PC700-DHCJP Instrukcja Użytkownika Pobierz pdf

P/NO. : MFL69325402(1506-REV00)

Printed in Korea

Please read these safety precautions carefully before using the product.

■ Make sure to connect the power cable a grounded outlet.

- You may be electrocuted or injured.

■ Use the rated voltage only.

- The product can be damaged, or you may be electrocuted.

■ During a thunder or lightning storm, unplug the power cable or signal cable.

- You may be electrocuted or a fire can break out.

■ Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered

with dust, dry the power plug completely or wipe dust off.

- You may be electrocuted due to excess moisture.

■ Do not insert a conductor (like a metal chopstick) into one end of the power cable while

the other end is connected to the input terminal on the wall. Additionally, do not touch the

power cable right after plugging into the wall input terminal.

- You may be electrocuted.

■ The appliance coupler is used as the disconnect device.

■ Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries

according to the instructions.

Safety Precautions

Mini-PC for Signage

PC100/PC200/PC700

Easy Setup Guide

Please read this guide carefully before using this product and keep it for future reference.

Please record the model number and serial number of the product on this guide. You will

need to provide this information (if applicable) when you require service.

Installation Environment of Mini-PC for Signage

Leave at least 10 cm of space at each side of the product from an obstacle when installing

the product to ensure sufficient ventilation.

< Install Mini-PC for Signage Attached

to Monitor >

< Install Mini-PC for Signage>

10 cm

*MFL69325402*

1 2 3 4 5 6 ... 23 24

Podsumowanie treści

Strona 1 - *MFL69325402*

P/NO. : MFL69325402(1506-REV00)Printed in KoreaPlease read these safety precautions carefully before using the product. Make sure to connect the pow

Strona 2 - PC100 Components

103 Connect PC100 (OUT) to the monitor (IN) with an RS-232C cable.4 Connect the PC100 to the monitor with a LINE-OUT cable.MIC INP/WDPMIC INP/WDPMIC I

Strona 3 - PC100 Monitor Integration

11PC2003 Connect PC100 (OUT) to the monitor (IN) with an RS-232C cable.4 Connect the PC100 to the monitor with a LINE-OUT cable.5 Connect a LAN cable

Strona 4

12PC200 Monitor IntegrationIf card does not become fully inserted into the insertion direction.Hit by hand carefully to make fully connected.Note1 Rem

Strona 5 - PC100 In/Out Cable Connection

13PC7001 Remove the screw & metal cover.2 Attach the product to the rail slots, and press it upward.3 Use screws to secure the product and the pro

Strona 6

14We recommend you to use the items provided with your PC700 and follow our instructions for inte-grating the product with your monitor in order to en

Strona 7

15PC7002Secure the PC700 to the set using the four screws provided.PC700 Monitor IntegrationFor proper use, it is recommended to use the basic compone

Strona 8

16For proper use, it is recommended to use the basic components provided with the PC700 to attach it to a monitor.The picture shows an example connect

Strona 9

17PC7003Secure the PC700 to the set using the four screws provided.● RGB, DP(Display Port), LINE-OUT(Audio Out), and LAN cables are not included. Yo

Strona 10

184 Connect PC700 (OUT) to the monitor (IN) with an RS-232C cable.3 Connect the PC700 to the monitor with a LINE-OUT(Audio Out) cable.AUDIOINAUDIOINAU

Strona 11 - PC200 Components

19PC7004 Connect PC700 (OUT) to the monitor (IN) with an RS-232C cable.3 Connect the PC700 to the monitor with a LINE-OUT(Audio Out) cable.5 Connect a

Strona 12 - PC200 Monitor Integration

2Please check that these components are present prior to installing.PC100 ComponentsWeight● The specifications shown above may change without prior n

Strona 13 - PC700 Components

20Connecting a Monitor with DP(Display Port) Cable2Connect PC700 to the monitor via a DP cable.1Connect the appropriate power cables to a monitor and

Strona 14 - PC700 Monitor Integration

21PC7004Connect a LAN cable to PC700.● If you connect multiple cables simultaneously and turn the product on, video output is prioritized accordingly

Strona 15

Strona 16 - 84WS70MS Model

Strona 17 - PC700 In/Out Cable Connection

Strona 18

3PC100PC100 Monitor Integration1 Place the handle into the slots on the side of the product.2 Use screws to secure the handle.3 Place the rail in the

Strona 19

44As shown below, use screws to secure the Box Guide in the four tap holes at the back of the monitor.5 Attach the Box Guide to the rail slots, and pr

Strona 20

5PC1004As shown below, use screws to secure the Box Guide in the four tap holes at the back of the monitor.5 Attach the Box Guide to the rail slots, a

Strona 21

63 Connect PC100 (OUT) to the monitor (IN) with an RS-232C cable.MIC INP/WDPMIC INP/WDPMIC INP/WDPMIC INP/WDPMIC INP/WDPMIC INP/WDPMIC INP/WDPMIC INP/

Strona 22

7PC1003 Connect PC100 (OUT) to the monitor (IN) with an RS-232C cable.5 Connect a LAN cable to the PC100.4 Connect the PC100 to the monitor with a LIN

Strona 23

84 Connect a LAN cable to PC100.3 Connect PC100 (OUT) to the monitor (IN) with an RS-232C cable.MIC INP/WDPMIC INP/WDPMIC INP/WDPMIC INP/WDPMIC INP/WD

Strona 24

9PC1004 Connect a LAN cable to PC100.3 Connect PC100 (OUT) to the monitor (IN) with an RS-232C cable.Connecting a Monitor with DP Cable● To enable