LG 42LT55A Instrukcja Użytkownika Pobierz pdf (Strona 52)

ENG

ENGLISH

CUSTOMIZING SETTINGS

Picture ID Settings

Picture ID

is used to change the settings of a

specic display using a single IR receiver for

multi-vision. Communication is possible between

a monitor with an IR receiver and other monitors

using RS-232C cables. Each monitor is identied

by a

Set ID

. If you assign the

Picture ID

using

the remote control, only displays with the same

Picture ID

and

Set ID

can be controlled remotely.

1 Assign the Set ID to the installed monitors as

shown below:

2X2 Multi-Vision (Total Set ID: 4)

Set IDs are assigned as shown in the picture.

AUDIO

(RGB/DVI)

REMOTE

CONTROL IN

RS-232C OUT

RS-232C IN

RS-232C OUT

RS-232C IN

RS-232C OUT

RS-232C IN

IR Receiver

RS-232C cable

Picture ID

Off

3 If you press the left/right buttons or the red ON

button for PICTURE ID repeatedly, the Picture

ID toggles between OFF and 1 to 4. Assign the

Set ID as you like.



A set with a different

Set ID

than the

Picture

cannot be controlled by IR signals.



Please refer to the

Installation Manual

for

more information on the assigning

Total Set

NOTE

Picture ID

◄ Off ►



Picture ID

is set to 2, the upper right

monitor, that has a

Set ID

of 2, can be

controlled by IR signals.



If you press the green

OFF

button for

PICTURE ID

, the

Picture ID

s for all monitors

are turned off. If you then press any button

on the remote control, all monitors can be

controlled by IR signals regardless of

Set ID



The

Picture ID

function may not work while

MY MEDIA

is operating.

2 Press the ON (Red) button on the remote con-

trol to assign the PICTURE ID.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 92 93

Komentarze do niniejszej Instrukcji

Brak uwag

LG 42LT55A Instrukcja Użytkownika Strona 52

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Wyświetlacze publiczne LG 42LT55A